Vorel Battery-operated LED light with motion sensor 50lm

The Vorel Battery-powered LED light with motion sensor is a versatile and practical light that provides an excellent lighting solution for dark spaces. This small but powerful light uses 6 SMD LEDs that produce a luminous flux of 50 lumens. It is ideal for use in stairwells, closets, warehouses or other areas where automatic lighting is required.

The lamp has a motion sensor with a detection angle of 120° and a twilight sensor, which together ensure that the light only turns on when needed. When the motion sensor is activated, the light remains on for 25–30 seconds. Three different operating modes (ON, AUTO and OFF) allow the device to be used in different situations.

The lamp is made of durable PC plastic, which ensures longevity and lightness. The integrated magnet on the base makes it easy to mount on metal surfaces, and the compact size (90 x 90 x 28 mm) allows the device to be placed even in tight spaces.

Intended use

1. Staircases and corridors : Improve safety in dark spaces with automatic lighting.
2. Closets and walk-in closets : Provides light for compact spaces without fixed electricity.
3. Warehouses and garages : Suitable for additional lighting when there are no power outlets nearby.
4. Bedside light : Works as a night light without disturbing fixed light.
5. Emergency lighting : An easily portable solution, for example during a power outage.

Package contents

• Vorel Battery-operated LED light
• User manual
• Batteries not included (requires 3 x AAA batteries)

Features

• Lamp power : 1 W – Provides sufficient light output for small spaces.
• Luminous flux : 50 lm – Soft and bright light.
• Operating modes : ON (light constantly on), AUTO (light turns on automatically when the sensor is activated), OFF (light off).
• Motion sensor detection angle : 120° – Wide coverage.
• Delay time : 25–30 s – The light stays on long enough after movement.
• Twilight sensor : Turns on the light only in the dark, saving batteries.
• Materials : Durable and lightweight PC plastic.
• Size : 90 x 90 x 28 mm – Compact and space-saving design.
• Power supply : 3 x 1.5 V AAA batteries – Easy and inexpensive battery operation.
• Magnetic mount : One magnet on the bottom – Easy to install on metal surfaces.

Vorel Battery-powered LED light user manual

1. Open the battery compartment and insert 3 x AAA batteries in the correct orientation.
2. Select the desired operating mode with the switch (ON, AUTO or OFF).
3. Place the lamp in the desired location either using a magnet or placing it on a flat surface.
4. In AUTO mode, the light only activates in the dark when it detects movement.
5. Replace the batteries as necessary when the light output begins to decrease.

How to choose the right LED light with motion sensor

When choosing a light with a motion sensor, it is worth considering the following factors:

1. Luminous flux : This 50 lumen light is suitable for small spaces, but larger spaces require more light output.
2. Power source : Battery-powered lights like this one are flexible, but for permanent use, rechargeable or mains-powered lights may be a better option.
3. Sensor angle and range : Wide 120° angle suits most needs.
4. Size and installation method : The compact lamp is easy to place, and the magnetic attachment adds convenience.

Warnings

• Do not leave batteries inside the lamp to drain, as they may leak and damage the device.
• Avoid using the device in damp or wet areas.
• Use only recommended batteries for optimal performance.

FAQ: Frequently Asked Questions

1. How long do the batteries last?
   On average, several months, depending on the frequency of use.
2. Can the lamp be installed outdoors?
   This model is not waterproof, so it is not recommended for outdoor use.
3. Can the light be left on continuously?
   Yes, but the batteries will drain faster in this mode.
4. What to do if the light doesn't come on?
   Check the condition of the batteries and make sure they are inserted correctly.
5. How is the lamp attached?
   You can use the magnet on metal surfaces or place it on a flat surface.