Yato Safety boots Portland S5 PVC antistatic

Yato Safety Rubber Boots Portland S5 PVC are high-quality and extremely durable work boots designed to provide maximum safety and comfort in even the most demanding working conditions. These boots combine top-notch protection with long-lasting durability, making them an ideal choice for construction sites, industry, agriculture and other challenging environments.

The boots' steel toe cap withstands impacts of up to 200 J and protects against crushing of the foot with a pressure of up to 15 kN. In addition, the steel nail penetration protection prevents penetration by sharp objects with a pressure of up to 1100 N. The boots' PVC material provides protection against moisture and chemicals, and the antistatic properties prevent the build-up of static electricity, which increases safety, especially in explosive environments.

The boots' anti-slip textured sole ensures good grip even on slippery surfaces, further increasing safety. The ergonomic design and supportive fit make the boots comfortable to wear during long shifts.

Intended use

Yato Portland S5 PVC safety boots are suitable for the following work environments and conditions:

Construction sites – Provide protection against moisture, chemicals and sharp objects.
Industry – Antistatic and chemical resistance make them safe in industrial environments.
Agriculture – Excellent protection against mud, dirt and moisture.
Chemical environments – Protect against exposure to hazardous substances.
Cold and wet conditions – PVC construction is suitable for cold and wet work environments.
Package contents
1 pair of Yato Portland S5 PVC safety boots
Product instructions
Features
Safety classification: S5 – Meets safety standards for demanding work environments.
Steel toe: Resists impacts with up to 200 J of energy and crushing forces of up to 15 kN.
Nail penetration protection: Steel protection withstands up to 1100 N of pressure against sharp objects.
Material: PVC – Provides protection against moisture and chemicals and is durable in daily use.
Antistatic: Prevents the build-up of static electricity.
Anti-slip: The soles ensure good grip on slippery surfaces.
Durability: Long service life even under heavy use.
Comfort: Ergonomic design allows for long-term use.

Yato Safety Rubber Boots User Manual
Take care to put on and take off your boots so they retain their shape and last longer.
Store your boots in a cool, dry place, out of direct sunlight.
Clean your boots regularly with water and dry thoroughly. Use a mild detergent if necessary.
Regularly check your boots for damage before use.
How to choose the right safety rubber boots?

When choosing safety boots, you need to consider the working conditions and the risks involved. Yato Portland S5 PVC boots are an excellent choice if your work environment requires protection from moisture, chemicals, sharp objects and heavy falling objects. The combination of protective features, durability and comfort of these boots makes them a standout choice among competitors.

Choosing the right shoe size for work boots

Choosing the right size of work boots is important to ensure comfort and safety at work. Wearing the wrong size boots can cause chafing, discomfort and even foot injuries over time. Here are some tips for choosing the right size:

1. Leave room to move
There should be 0.5-1 cm of space between your foot and the toe of the boot, allowing your foot to move freely. This ensures that the boot does not press on your toes or rub against your skin, especially when working long shifts.
Space is also needed for thicker socks, which may be worn in cold conditions.
2. Measure your foot

If it is not possible to try on the boots before buying, measure the length of your foot as follows:

Place your foot on a flat surface: Use a sheet of paper, for example.
Draw the outline of your foot: Use a pencil to draw around your foot, keeping the pencil as straight as possible.
Measure the longest point: Measure the distance between your longest toe and your heel.
Add some room: Add about 0.5-1 cm to your measurements.
3. Size comparison

Use the manufacturer's size chart to select the size based on your measured foot length. Make sure you select the size based on the insole length, as this will affect the fit of the shoe.

Size Foot Length (cm) Insole Length (cm)
39 25.1 25.5
40 25.5 25.9
41 26.2 26.7
42 26.9 27.4
43 27.6 28.1
44 28.1 28.6
45 28.7 29.3
46 29.4 30.0
4. Other things to consider

Sock thickness: Choose your size based on the thickness of your socks, especially in cold conditions where thick, thermally lined socks can increase the size of your foot.
Ergonomic fit: A work boot should be roomy enough to not weigh down your foot during the day, but also tight enough to prevent excessive movement and chafing.
Size differences: Some manufacturers may have different sizing. Therefore, it is always a good idea to check the size recommendations of the brand in question.
5. Test the shoes

When you receive your work boots:

Worn indoors for a short time to make sure they are comfortable.
Check that there is no pressure or chafing in the toe and heel area.
Make sure the ankle and sole are supportive but comfortable.
If necessary, purchase separate insoles to improve comfort

These guidelines will help you ensure that you choose the right size of work boots that will ensure comfort and safety while working.

What to consider when choosing safety shoes?

The choice of safety shoes has a significant impact on occupational safety and comfort. According to the article, it is important to consider the following factors when choosing safety shoes:

Safety classification: Understand the requirements of the work environment. Footwear with an S5 classification, such as the Yato Portland boots, is suitable for wet and hazardous conditions where both water resistance and nail penetration protection are required.
Impact and compression resistance: Choose footwear with a steel toe cap if there is a risk of hitting or crushing heavy objects in the work environment.
Nail penetration protection: A steel toe cap protects the foot from sharp objects. This is especially important on construction sites and in industrial environments.
Material durability: The PVC material used in Yato boots offers excellent protection against moisture, chemicals and dirt, and is easy to maintain.
Comfort and fit: Long shifts require footwear with an ergonomic design and a comfortable fit.
Slip resistance: Slippery surfaces in the work environment require a sole structure that ensures good grip. The textured sole of Yato boots is designed for this purpose.

Warnings
Make sure the boots are intact and suitable for your work environment before use.
Do not use the boots if there is visible damage to their construction.
Follow all safety instructions for your workplace when using the boots.
FAQ: Frequently Asked Questions
Can these boots be used when handling chemicals?
Yes, the PVC material provides excellent protection against a wide range of chemicals.
How do I care for the boots?
Wash with water and dry thoroughly, store in a dry and cool place.
Are the boots comfortable for long-term use?
Yes, the ergonomic design and supportive fit ensure comfort.
Do the boots have good grip on slippery surfaces?
Yes, the anti-slip sole provides excellent grip.
Are the boots resistant to sharp objects?
Yes, the steel nail penetration protection can withstand up to 1100 N of pressure.